Geosynthetic

Indodrain 100 Bi-Planner Geonet Core sandwiched between non-woven geotextile filters on both side. It is used mainly for vertical drainage to reduce pore water pressure and avoid backfill saturation.

Indodrain 250 Bi-Planner Geonet Core sandwiched between non-woven geotextile filters on both side. It is used for; Vertically Drainage - Bridge Abutment Horizontally Drainage - Embankment Formation

Salt Barrier Bi-Planner Geonet Core sandwiched between non-woven geotextile filters on both side. It is prevent "sweet" soil zone damage of soft landscaping areas, caused by the capillary rise of saline groundwater. The Salt Barrier geocomposite is developed specifically to replace the traditional 300mm crushed stone granular layer, reducing the environmental impact by avoiding the use of a primary resource.

Indonet Geonets Indonet Geonet core are manufactured from High quality High Density Polyethylene (HDPE) material

Tri - Planner Geonet Core(3D) Tri-Planner Geonets consist of three polymeric strips one is in middle that provides proper channelized flow while other two diagonal strips minimize the geotextile impression thus this nets provide higher lateral drainage of liquids & gases in all directions.